RAU Workbench 8000 Vice with Scissor Lift 1,250 x 840-1,040 x 900 mm (W x H x D)

Beech plywood panel with finger-jointed lamination. Front edge with radius, other edges chamfered. Surface protected with environmentally friendly Danish oil. The classic among worktops: durable, pressure-resistant, long-lasting, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from tree to worktop), using raw materials from sustainable and regional forestry. 4-leg welded frame with two leg pairs made of steel profile tube (45 x 45 x 2 mm) including depth bracing (top and bottom). Integrated height adjustment in the lower part of the frame legs using steel profile tube (40 x 40 x 2 mm) with hole pattern (20 mm) and end element including level compensation and anti-slip stud for secure standing. Crossbeams made of C-profile (40 x 40 x 2 mm) at the top under the worktop (front, back) and at the bottom (back). The frame legs are prepared for the installation/retrofit of a set of castors. 1 sub-cabinet, 330 x 620 x 650 mm (W x H x D), with sliding door, behind which is 1 vice. The vice is forged from the best quality steel in drop dies, hardened, and considered unbreakable. Adjustable guides always guarantee smooth operation. The MDS enables quick removal of the spindle key (also known as the swivel handle) to use any tool from 1/2" to square as a drive tool. The extra-large, cleanly hardened anvil can be ideally used for smaller straightening and upsetting tasks. Jaw width 120 mm, clamping depth 82.5 mm, clamping range 146 mm, anvil size 75 x 75 mm, total length 365 mm, base diameter 150 mm. The vice is quickly and easily folded under the workbench using a folding lift. The integrated height adjustment device ensures ergonomic work, allowing both height adjustment and rotation of the vice. 1 sub-cabinet, 580 x 620 x 650 mm (W x H x D). Drawer size L, internal dimensions 490 x 560 mm (W x D). Roller-bearing partial extension slides (90% extension) with self-closing and anti-rebound features. The usable height of the drawer corresponds to the front height minus 15 mm. Completely closed drawer tray for optimal accommodation of drawer divider sets. Continuous ErgoScript® handle strip: steel sheet base with aluminum-colored overlay and integrated transparent cover.