RAU Workbench 8000 Vice with Lift 1,500 x 840-1,040 x 900 mm (W x H x D)

Beech finger-jointed blockboard. Front edge with radius, other edges chamfered. Surface protection with environmentally friendly linseed oil varnish. The classic among worktops: resilient, pressure-resistant, durable, natural, robust, beautiful, wear-resistant, reusable. 100% from our own production (from tree to worktop), with raw material from sustainable and regional forestry. 4-leg welded frame with two frame leg pairs made of profile steel tubing (45 x 45 x 2 mm) including depth braces (top and bottom). Frame legs with integrated height adjustment at the bottom / height adjustment by means of profile steel tubing (40 x 40 x 2 mm) with hole pattern (20 mm) and end element including leveling and anti-slip stud for secure footing. Cross braces made of C-profile (40 x 40 x 2 mm) at the top under the worktop (front, back) and at the bottom (back). The frame legs are prepared for the installation/retrofitting of a set of castors. 1 sub-cabinet, 330 x 620 x 650 mm (W x H x D), with sliding door, behind it 1 vice. The vice is forged from the best quality steel in drop-forged blocks, hardened, and is considered unbreakable. Adjustable guides always guarantee smooth operation. The MDS allows for quick removal of the spindle key (also called swivel knob) to use any 1/2" to square tool as a drive tool. The extra large, cleanly hardened anvil can be ideally used for smaller straightening and upsetting work. Jaw width 120 mm, clamping depth 82.5 mm, clamping range 146 mm, anvil size 75 x 75 mm, total length 365 mm, base diameter 150 mm. The vice is quickly and easily folded under the workbench using a folding lift. The integrated height adjustment device, which not only allows for height adjustment but also for rotating the vice, ensures ergonomic working. 1 sub-cabinet, 580 x 620 x 650 mm (W x H x D). Drawer size L, internal dimensions 490 x 560 mm (W x D). Roller-bearing partial extension slides (90% extension) self-closing and anti-rebound. The usable height of the drawer corresponds to the front height minus 15 mm. Drawer tray completely closed for optimal accommodation of drawer partitioning sets. Continuous handle rail ErgoScript®: sheet steel base with aluminum-colored overlay and integrated transparent cover.