RAU Tool Wall 01 accessories required

Set consisting of: 1 fastening set (crossbeam) with 2 system supports, 1 perforated panel (650 mm high) with square system perforation (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for accommodating perforated panel accessories. 1 shelf, melamine-coated (300 mm deep). 1 retaining rail for accommodating storage bins (open hanging edge on the rear side of the storage bins required). Installation height of the add-on elements adjustable within the system supports. The fastening set (crossbeam) is attached to the system substructure at the rear under the worktop. The 2 system supports (aluminum profile 40x40 mm) are screwed to the fastening set (crossbeam) by means of sliding blocks (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains free (no screwing to the worktop). The system supports have a profile groove on all 4 sides, allowing for all-round use. The 2 system supports are screwed on the left and right outside, creating 1 system field in the system width.