RAU Tool Wall 01 Accessories required

Set consisting of: 2 fastening sets (crossbars) with 2 system uprights, 2 perforated panels (650 mm high) with square system perforations (10 x 10 mm holes, 38 mm hole center-to-center distance) for holding perforated panel accessories. 2 melamine resin-coated shelves (300 mm deep). 2 mounting rails for holding storage bins (open hanging edge on the back of the storage bins required). Installation height of the add-on elements adjustable within the system uprights. The fastening set (crossbar) is attached to the system substructure at the rear, under the worktop. The 4 system uprights (40 x 40 mm aluminum profile) are screwed to the fastening set (crossbar) using T-slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains clear (no screwing to the worktop). The system uprights have a profile groove on all 4 sides, allowing for all-round use. The 4 system uprights are screwed on to the left and right outer sides, creating 2 system fields within the system width.