RAU Tool Wall 02 Accessories Required

Set consisting of: 2 fastening sets (crossbar) with 2 system uprights, 2 perforated panels (450 mm high) with square system perforation (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated panel accessories. 2 tiltable metal shelves (300 mm deep) with all-round upstands. 2 retaining rails for holding storage bins (open hanging edge required at the back of the storage bins). 2 flat screen holders with mounting adapter for perforated panel (VESA MIS-D 75/100). Installation height of the add-on elements adjustable within the system uprights. The fastening set (crossbar) is attached to the system substructure at the back, under the worktop. The 4 system uprights (aluminum profile 40 x 40 mm) are screwed to the fastening set (crossbar) using slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains clear (no screwing onto the worktop). The system uprights have a profile groove on all 4 sides, allowing for all-round use. The 4 system uprights are screwed on to the left and right outer sides, creating 2 system fields in the system width.