RAU Tool Wall 03 Accessories required

Set consisting of: 2 fastening sets (crossbar) with 4 system supports, 2 perforated plates (450 mm high) with square system perforations (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated plate accessories. 2 melamine-coated shelves (300 mm deep). 2 mounting rails for holding storage bins (open hanging edge on the back of the storage bins required). 2 flat screen holders with mounting adapter for perforated plate (VESA MIS-D 75/100). 2 melamine-coated cardboard magazines (600 mm deep), with mounting brackets and C-profiles attached at the front and back for variable positioning of the plug-in brackets by means of system bolts. Installation height of the add-on elements adjustable within the system supports. The fastening set (crossbar) is attached to the system base at the back, under the worktop. The 4 system supports (aluminum profile 40 x 40 mm) are screwed to the fastening set (crossbar) by means of slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains free (no screwing onto the worktop). The system supports have a profile groove on all 4 sides, allowing for all-round use. The 4 system supports are screwed on to the left and right outer sides, creating 2 system fields in the system width.