RAU Tool Wall 04 Accessories Required

Set consisting of: 2 mounting kits (crossbars) with 4 system supports, 2 perforated panels (650 mm high) with square system perforations (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated panel accessories. 2 melamine-coated shelves (300 mm deep). 2 mounting rails for holding storage bins (open hanging edge on the back of the storage bins required). 2 pairs of outriggers (550 x 300 mm D x H) for holding running rails/mounting rails. 4 running rails/mounting rails for holding lighting strips and/or trolleys with snap hooks. 2 trolleys with snap hooks for holding spring balancers, balancers, etc., 2 LED workbench lights: linear luminaires (luminaire housing made of aluminum). Integrated electronic LED converter. On/off switch, connecting cable with plug. Installation height of the add-on components adjustable within the system supports. The mounting kit (crossbar) is attached to the system substructure at the back under the workbench. The 2 system supports (aluminum profile 40 x 40 mm) are screwed to the mounting kit (crossbar) by means of slot nuts (height adjustable) and run upwards behind the workbench, so that the entire depth of the workbench remains free (no screwing onto the workbench). The system supports have a profile groove on all 4 sides, allowing for all-round use. The 4 system supports are screwed on at the outer left and right as well as in the middle, creating 2 system fields in the system width. This product contains a replaceable light source of energy efficiency class D. The light source can only be replaced by a professional.