RAU Tool Panel 04 Accessories required 1,323 lm

Set consisting of: 1 fastening set (crossbeam) with 2 system uprights, 1 perforated panel (650 mm high) with square system perforations (perforations 10 x 10 mm, hole center-to-center distance 38 mm) for accommodating perforated panel accessories. 1 melamine-coated shelf (300 mm deep). 1 mounting rail for accommodating storage bins (open hanging edge on the back of the storage bins required). 1 pair of cantilevers (550 x 300 mm D x H) for accommodating a guide rail/mounting rail. 2 guide rails/mounting rails for accommodating a lighting strip and/or trolley with carabiner. 1 trolley with carabiner for accommodating spring balancer, balancer. 1 LED workstation light: linear light (light housing made of aluminum). Integrated electronic LED converter. On/off switch, connection cable with plug. Installation height of the add-on elements adjustable within the system uprights. The fastening set (crossbeam) is attached to the system substructure at the back, under the worktop. The 2 system uprights (aluminum profile 40 x 40 mm) are bolted to the fastening set (crossbeam) using sliding blocks (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains free (no screwing onto the worktop). The system uprights have a profile groove on all 4 sides, allowing for all-round use. The 2 system uprights are bolted on the outer left and right, creating 1 system field. This product contains a replaceable light source of energy efficiency class D. The light source can only be replaced by a professional.