RAU Tool Wall 04 Accessories required 3.112 linear meters

Set consisting of: 1 fastening set (crossbeam) with 2 system uprights, 1 perforated panel (650 mm high) with square system perforation (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated panel accessories. 1 melamine-coated shelf (300 mm deep). 1 retaining rail for holding storage bins (open hanging edge required on the back of the storage bins). 1 pair of cantilevers (550 x 300 mm D x H) for holding running rail/mounting rail. 2 running rails/mounting rails for holding a lighting strip and/or trolley with carabiner. 1 trolley with carabiner for holding a spring balancer. 1 LED workplace light: linear luminaire (aluminum luminaire housing). Integrated electronic LED converter. On/off switch, connection cable with plug. Installation height of the add-on elements adjustable within the system uprights. The fastening set (crossbeam) is mounted on the system substructure at the back, under the worktop. The 2 system uprights (aluminum profile 40 x 40 mm) are bolted to the fastening set (crossbeam) using T-slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains clear (no bolting to the worktop). The system uprights have a profile groove on all 4 sides, allowing for all-round use. The 2 system uprights are bolted on the left and right outer sides, creating 1 system field. This product contains a replaceable light source of energy efficiency class D. The light source is only replaceable by a specialist.