RAU Tool Wall 05 Accessories required

Set consisting of: 1 fastening set (crossbeam) with 4 system supports, 2 perforated panels (450 mm high) with square system perforation (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated panel accessories. 1 shelf, melamine-coated (300 mm deep), 2 tiltable metal shelves (300 mm deep) with all-round upstands. 2 mounting rails for holding storage bins (open hanging edge on the back of the storage bins required) and/or power strips. 1 flat screen holder with mounting adapter for perforated panel (VESA MIS-D 75/100). Installation height of the add-on elements adjustable within the system supports. The fastening set (crossbeam) is attached to the system substructure at the back under the worktop. The 2 system supports (aluminum profile 40 x 40 mm) are screwed to the fastening set (crossbeam) using T-slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains clear (no screwing to the worktop). The system supports have a profile groove on all 4 sides, allowing for all-round use. The 4 system supports are screwed on the left and right outside as well as in the middle, creating 2 system fields within the system width.