RAU Tool panel 06 accessories required 1.323 linear meters

Set consisting of: 1 fastening set (crossbar) with 4 system supports. 3 perforated panels (450 mm high) with square system perforations (perforation 10 x 10 mm, hole center-to-center distance 38 mm) for holding perforated panel accessories. 1 melamine-coated shelf (300 mm deep). 1 tiltable metal tray (300 mm deep) with all-round upstands. 1 retaining rail for holding storage bins (open hanging edge required on the back of the storage bins) and/or power strip. 1 flat screen holder with mounting adapter for perforated panel (VESA MIS-D 75/100). 1 melamine-coated cardboard magazine (600 mm deep) with mounting brackets and C-profile mounted front and back for variable positioning of the plug-in brackets using system bolts. 1 pair of cantilevers (550 x 300 mm (D x H)) for holding a running rail/mounting rail. 2 running rails/mounting rails for holding a lighting strip and/or trolley with carabiner. 1 trolley with carabiner for holding a spring balancer. 1 x LED workplace light; linear luminaire (luminaire housing made of aluminum). Integrated electronic LED converter. On/off switch, connection cable with plug. Installation height of the add-on elements adjustable within the system supports. The fastening set (crossbar) is attached to the system substructure at the back under the worktop. The 2 system supports (aluminum profile 40 x 40 mm) are screwed to the fastening set (crossbar) using slot nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains free (no screwing onto the worktop). The system supports have a profile groove on all 4 sides, allowing for all-round use. The 4 system supports are screwed on at the far left and right and in the middle, creating 2 system fields in the system width. This product contains a replaceable light source of energy efficiency class D. The light source can only be replaced by a specialist.