RAU Tool Wall 06 Accessories required 3.112 lm

Set consisting of: 1 fastening set (crossbar) with 4 system supports. 3 perforated panels (450 mm high) with square system perforation (10 x 10 mm perforation, hole center-to-center distance 38 mm) for holding perforated panel accessories. 1 shelf, melamine-coated (300 mm deep). 1 inclinable metal tray (300 mm deep) with all-round upstands. 1 retaining rail for holding storage bins (open hanging edge on the back of the storage bins required) and/or power strip. 1 flat screen holder with mounting adapter for perforated panel (VESA MIS-D 75/100). 1 cardboard magazine, melamine-coated (600 mm deep) with mounting brackets and C-profile attached at the front and rear for variable positioning of the plug-in brackets by means of system bolts. 1 pair of arms (550 x 300 mm (D x H)) for holding a running rail/mounting rail. 2 running rails/mounting rails for holding a lighting strip and/or trolley with carabiner. 1 trolley with carabiner for holding a spring balancer. 1 x LED workplace light; linear luminaire (luminaire housing made of aluminum). Integrated electronic LED converter. On/off switch, connection cable with plug. Installation height of the add-on elements adjustable within the system supports. The fastening set (crossbar) is attached to the system substructure at the back under the worktop. The 2 system supports (aluminum profile 40 x 40 mm) are screwed to the fastening set (crossbar) by means of T-nuts (height adjustable) and run upwards behind the worktop, so that the entire depth of the worktop remains free (no screwing onto the worktop). The system supports have a profile groove on all 4 sides, so that all-round use is possible. The 4 system supports are screwed on the left and right outside as well as in the middle, creating 2 system fields in the system width. This product contains a replaceable light source of energy efficiency class D. The light source can only be replaced by a specialist.