Sonax Sealing Set PROFILINE Ceramic Coating

SONAX PROFILINE CeramicCoating CC Plastic + Rubber is a new type of sealant based on Si-Carbon technology for refreshing and protecting unpainted plastic parts in the exterior. The extremely flexible coating is also suitable for tire care and protects against fading due to UV radiation. It gives surfaces strong water and dirt-repellent properties and is very easy to apply. Wash and dry the vehicle thoroughly. Immediately before sealing, the parts must be absolutely clean and water-free. Dispense a few drops of CC Plastic+Rubber onto the soft foam side of an application pad and apply thinly in small sections to the surface. Ideally, contact areas with the bodywork should be masked off beforehand so that no product gets onto the paint. If it does happen, wipe it off immediately with the microfiber cloth used for preparation. After a short exposure time of approx. 3-5 minutes, wipe off excess product with a new microfiber cloth. The coating should then cure for at least 6 hours. During this entire time, the vehicle must be in a dry environment and the surfaces must no longer be touched. For optimal product effectiveness, we recommend letting the coating rest for 12 hours to ensure a complete reaction with the surface. Notes: Always use pH-neutral shampoos for washing. Avoid alkaline cleaners. Ensure good ventilation during processing.